Barandov - Příbram
Barandov 434, Příbram, 261 01
Barandov - Příbram is an electric-vehicle charging station located at Barandov 434, Příbram, 261 01 . It provides 4 charge points, 4 connectors and up to 22 kW.
Charging details
- Maximum power
- 22 kW
- Charge points
- 4
- Connectors
- 4
- Usage cost
- 10 KČ / kWh = 0,4 EUR / kWh
- Country
- Czechia
- Last verified
- 23 Jan 2025
Data source: Open Charge Map. Source status last updated 23 Jan 2025. PlugSphere page updated 13 Jul 2026. Imported reference data; check the operator before travelling.
Dvě dvouportové 2x 22 kW AC nabíjecí stanice EVExpert - celkem tedy 4 nabíjecí body x 22 kW Stanice pouze se zásuvkou - nezbytný vlastní kabel TYPE 2 !!! Nabíjení prostřednictví QR kódu / linku v popisu stanice Zahájení nabíjení - načtěte QR kód na stanici nebo použijte odkaz: Stanice 1 (stanice vlevo) levý port (1): https://charge.evexpert.eu/c11601 pravý port (2): https://charge.evexpert.eu/c11602 Stanice 2 (stanice vpravo) levý port (1): https://charge.evexpert.eu/c11591 pravý port (2): https://charge.evexpert.eu/c11592 Postup nabíjení: 1) připojte vozidlo k nabíjecí stanici 2) naskenujte QR / použijte link a vyberte správný konektor 3) zvolte předplacenou částku, za kterou chcete nabíjet 4) platební brána vás provede rezervací platby, kde zadáte email pro zaslání potvrzení 5) po rezervování platby bude zahájeno nabíjení 6) po dokončení nabíjení bude zúčtována skutečná částka za nabíjení EN description: Two dual-port 2x 22 kW AC charging stations by EVExpert – a total of 4 charging points x 22 kW. Socket only stations - own cable Type 2 necessary !!! Charging via QR Code / direct link in description Start Charging – Scan the QR Code on the Station or Use the direct link: Station 1 (Left Station) Left Port (1): https://charge.evexpert.eu/c11601 Right Port (2): https://charge.evexpert.eu/c11602 Station 2 (Right Station) Left Port (1): https://charge.evexpert.eu/c11601 Right Port (2): https://charge.evexpert.eu/c11602 Charging Process: 1) Connect your vehicle to the charging station. 2) Scan the QR code / use the link and select the correct connector. 3) Choose the prepaid amount for which you want to charge. 4) The payment gateway will guide you through the payment reservation, where you will enter your email to receive confirmation. 5) After payment is reserved, charging will begin. 6) Upon completion, the actual charging amount will be charged from your card.
Connectors
- Connector 22 kW × 4
Driver reviews
Sign in to rate this station and join the discussion.
No reviews yet — be the first to rate it.